Specifications

Figure 6–5: Shipping Block Attachment Hardware
RE_UK00308A_89
RED SHUTTLE SHIPPING BLOCKS
(REAR PAIR)
RED SHUTTLE SHIPPING BLOCKS
(FRONT PAIR)
6.6 Front Door and Rear Access Panels
Use the following procedure to remove the front door and rear access
panels (see Figure 6–6). Do the reverse of this procedure to reinstall the
front and rear access panel.
1. Open the the front door panel.
2. Use a medium screwdriver to lift the catch on the upper hinge pin.
3. Remove the front door panel by tilting it away from the door hinge.
4. Use a medium screwdriver to loosen the two captive screws on the
rear access panel.
5. Remove the rear access panel by lifting it away from the printer.
6–8 REMOVAL AND REPLACEMENT PROCEDURES