Specifications

7. Install the two red shipping blocks (see Figure 6–4) by reaching
behind the paper handling assembly. Install the blocks through the
printer front enclosure door.
Figure 6–4: Shipping Blocks
SCREWS, LOCKWASHERS, PLAIN WASHERS
SECURE TO FRONT PAIR OF SHUTTLE
SHIPPING BLOCKS
RE_UK00307A_89
8. Use an 8 mm socket wrench to install the two hex head cap bolts and
washers holding the shuttle shipping blocks in place (see Figure 6–5).
These bolts are located inside and under the printer.
9. Close the shroud cover and close the top cover.
REMOVAL AND REPLACEMENT PROCEDURES 6–7