Specifications

Chapter 6
REMOVAL AND REPLACEMENT PROCE-
DURES
6.1 Overview
This chapter provides removal and replacement procedures for the LG31
Field Replaceable Units (FRUs).
NOTE
Care should be taken when removing and replacing PCBs. All
boards are slot dependent but are not keyed to prevent insertion
into the wrong slot. The part description is marked both on the
boards and on their respective slots.
DANGER STORED HIGH VOLTAGE
Wait five minutes after removing ac source before disassem-
bling. Refer to manual for service instructions.
DANGER HAUTE TENSION EMMAGASINEE
Attendre 5 minutes après avoir enlevé la source de courant
alternatif et avant de demonter la machine. Voir le manuel
pour les instructions d’entretien.
PELIGRO ALTO VOLTAJE ALMACENADO
Antes de proceder a desensamblar esto, esperar 5 minutos
despues de haber removido la fuente de C.A. para instrucciones
de servicio de mantenimiento, vease el manual.
REMOVAL AND REPLACEMENT PROCEDURES 6–1