Specifications

4.1.3 Power-Up Parameters Retained
Upon power-up of the LG31 printer, the parameters that will be retained
from the previous power-on session are listed in Table 4–3.
Table 4–3: Customer Printer Parameters Retained on Power-Up
Selectable Parameter
Horizontal Pitch
Vertical Pitch
Font
Top of Form
Forms Length
Top and Bottom Margin
Left and Right Margin
Autowrap
Line Feed/New Line
Carriage Return/New Line Mode
Horizontal Tabs
Vertical Tabs
GL Character Set
GR Character Set
G0 Character Set
G1 Character Set
G2 Character Set
G3 Character Set
All Interface Settings
4.1.4 Reset State
When the LG31 printer receives a reset sequence from the host computer
or the inner control panel (operator’s input), the printer is set to the
default settings (see Table 4–4).
Table 4–4: Reset State Default Parameters
Selectable Parameter Reset Default Condition
Printing Status On-line (ready)
Horizontal Pitch 10 Characters-Per-Inch (CPI)
Vertical Pitch 6 Lines-Per-Inch (LPI)
Font Data Processing
Forms Length 66 Lines (11 in/27.94 cm)
PRINTER AND HOST CONFIGURATION 4–3