Specifications

Table 1–2 (Cont.): LG31 Printer Specification
Radio Frequency Interference Tested/certified to RFI standards FCC 15,
Subpart J, Class A; VDE 0871 Class B
Acoustic Noise LNPA 6.7 bels
LPA 55 dBA
Operating
Altitude 2.4 km (0 to 8,000 ft)
Temperature 10°C to 40°C (50°F to 104°F)
Maximum allowable reduced by factor 1.8°C/1000
m (1°F/1000 ft)
Relative humidity 10% to 90% non-condensing with a maximum wet
bulb temperature of 28°C (82.4°F) a minimum
dew point 2°C (35.6°F)
Non-operating
Altitude 4.9 km (0 to 17,700 ft)
Temperature -40°C to 66°C (-40°F to 150.8°F)
Maximum allowable reduced by factor 1.8°C/1000
m (1°F/1000 ft)
Relative Humidity 5% to 95% non-condensing
Printing
Line Length 33.5 cm (13.2 in)
Lines Per Inch (LPI) Spacing 6, 8, 10
Characters Per Inch (CPI) 5, 10, 12, 13.3, 15, 16.7 (plus horizontal and
vertical expansion of each)
Paper Slew 50.0 cm/sec (20 in/sec)
Line Feed 12.5 msec at 6 lines/inch
Horizontal Tabs 198 positions
Vertical Tabs 66 positions
Paper/Forms
Paper width 76.2 mm (3 in) to 420.1 mm (16.54 in)
Form Length 8.4 mm (0.33 in) to 559 mm (22 in)
Fan Folds 152 mm (6 in) to 305 mm (12 in)
Paper weight 90 g/m² (24 lbs) for single ply paper
Form Thickness Less than 0.63 mm (0.025 in)
Card Stock Up to 163 g/m² (100 lbs) can be used
INTRODUCTION 1–9