Specifications

Table B–3 (Cont.): LG31 Escape and Control Sequences
Name Mnemonic Sequence
P4 Width of wide bars and spaces
0/missing = default value
P5 Gap between characters
0/missing = default value
P6 Height of bars
0/missing = default value
P7 Control-character encoding character
0 = no encoding of control characters
n = the decimal ASCII value of the character
P8 Orientation
0 = Same as current page
1 = Horizontal (portrait)
2 = Vertical, rotation of -90( landscape)
3 = Vertical, rotation of +90 ( landscape)
4 = Horizontal, upside down, rotation
of 180
Other values = disregard sequence
Missing = Default value
P9 Characters option
0 = Default
1 = No Characters
2 = Characters in currently selected plot font
3 = Characters in OCR A
4 = Characters in OCR B
Other = Disregard sequence
Missing = Default value
Block
Character
DECBCM ESC
1/11
%
2/5
SP
2/0
1
3/1
Entering Starts the block character sequence.
(8.4.2
8.4.4) ESC
1/11
%
2/5
@
4/0
Stops the block character sequence.
NOTE
This stop sequence is also used to stop barcodes.
Block
Character
DECBCS CSI
9/11
P1
***
;
3/11
P5
***
’
2/7
r
7/2
B–6 CONTROL CODE AND CONTROL SEQUENCE SUMMARY