Specifications

Figure 7–3: Amplitude Pattern Sample Printouts
A. Key 3: Amplitude pattern No. 1 Normal, no adjustment required.
B. Key 3: Amplitude pattern No. 2. Amplitude swing too small (gap at center). Adjust R152 on SMMC
board clockwise until amplitude pattern No. 1 is obtained.
C. Key 3: Amplitude Pattern No. 3. Amplitude swing too large (dots overlap at center). Adjust R152 on
SMMC board counterclockwise until amplitude pattern No. 1 is obtained.
RE7583
PRINT QUALITY ADJUSTMENT PROCEDURES 7–9