Operator`s manual

Table 4–6 (Cont.): Print Review Procedure

Action Results Display

(5) CPI LPI Prints horizontal timing patterns [.H E P]

(6) PAPER

Prints vertical timing pattern [.U E P]

(7) FONT

Prints intermodule gap pattern [ . 9 P]

(8) SET TOF

Prints checkerboard pattern [.c b P]

Indicates a continuous printing pattern. Press key (9) to stop printing. Press key (9)

again to restart the most recently selected pattern.

4.5.4 Forms Adjustment

The Forms Adjustment procedure allows movement of the current form

up or down on the paper after the form parameters are set by TOF Set

procedure, using the Forms Control item 3 in the Conﬁguration Menu

(see Chapter 3).

Moving paper forward causes the current top of form to be displaced

downward on the paper; moving the paper in the reverse direction causes

the form to be moved upward on the paper. The form limits and Top Of

Form using the paper tractor locking lever notch should already have

been set prior to using the Forms Adjustment procedure in Table 4-7.

Adjusting the form locations on the paper does not alter the current

form parameters (margins, length).

4–36 SETTING COMMUNICATIONS AND PRINT PARAMETERS