Operator`s manual

Table 4–3: Initialization Procedure
Action Results Display
Press (3) ON
LINE
Printer set to off-line. [ O F L]
Press (9) FCT Printer enters Mode Selection
mode.
[.F n c]
Press (1) PRG Printer enters Initialization
mode.
[.su]
Select one:
Press (0) TEST
CLR
Returns to off-line without any
changes.
[O F L]
or
(3) ON LINE Resets the printer parameters to
their respective Reset State.
[.C S U]
[.8.8.8]
[iP]
[.8.8.8]
[OFL]
(9) FCT To initialize printer configuration
to default conditions.
[.IS. U]
[.8.8.8]
[iP]
[.8.8.8]
[OFL]
NOTE
A user’s configuration menu selections are reset to factory
settings as a result of a defective battery or unintentional
operation of the initialization switch on the inner control panel.
4–30 SETTING COMMUNICATIONS AND PRINT PARAMETERS