Operator`s manual

4.5 Function Mode

In the function mode (see Figure 4–21), you can perform the following:

• Printer initialization

• Forms setup

• Print adjustment

• Forms adjustment

• Margin setup

• Reverse form feed

• Buffer clear

Unlike operations in the programming mode, you can perform operations

in one of the characteristics for entry into the function mode. A menu

is not available to lead you through the modiﬁcation process. The

procedures for performing these operations are contained in the following

sections.

4.5.1 Printer Initialization

There are two ways to initialize the LG31 printer:

1. Through the control panel.

2. Through the initialization switch.

It may be necessary to perform the initialization procedure if the printer

becomes locked, or if you want to return to the factory settings. Table

4-3 describes how to use the control panel to initialize the LG31 printer.

Table 4-4 describes how to initialize the printer using the initialization

switch.

4–28 SETTING COMMUNICATIONS AND PRINT PARAMETERS