Operator`s manual

4.4.1.5 Horizontal Expansion
Figure 4–13: Font Horizontal Expansion
FONT:
0. Exit
1. Style
2. CPI
3. Country
4. Mode
5. Horizontal Expansion
6. Vertical Expansion
Horizontal Expansion -
0. Exit
1. X1
2. X2
Horizontal Expansion - X1
Press the number ‘0’ to return to normal operation.
To continue modification select (1-8).
To select the horizontal expansion subcategory of parameters (see Fig-
ure 4–13):
1. Place the printer off-line ([OFL]isdisplayed). If the printer is
on-line ([OnL]isdisplayed), press the ON LINE key.
2. Press the PRG key ([ P r o] is displayed). The LG31 printer will print
the configuration menu.
3. Press the (5) key. The LG31 will print the list of horizontal expan-
sions available.
4. Press the key with the same number as the desired expansion ((2)
selects the times two expansion).
5. Press the (0) key to return the LG31 printer to off-line operation
([ O F L] is displayed).
4–20 SETTING COMMUNICATIONS AND PRINT PARAMETERS