Operator`s manual

Table 4–2: Serial Interface Strapping Options
Strap
Number Action When In (In = 1; Out = 0)
READ/BUSY CONTROL
A1 Not assigned
A2 Not assigned
A3 Not assigned
A4 Enable READY/BUSY status by means of SCA (pins 11 and 19)
A5 Enable READY/BUSY to cause transmission of XON/XOFF codes
A6 Enable READY/BUSY to cause transmission of a 200 msec
BREAK
A7 Enable READY/BUSY to turn circuit CD (interface pin 20) ON
or OFF
A8 Enable READY/BUSY to turn circuit CA (interface pin 4) ON or
OFF
FAULT CONTROL
A9 Not assigned
A10 Not assigned
A11 Not assigned
A12 Enable NO FAULT/FAULT status by means of SCA (pins 11 and
19)
A13 Enable NO FAULT/FAULT to cause transmission of XON/XOFF
codes
A14 Enable NO FAULT/FAULT to cause transmission of a 200 msec
BREAK
A15 Enable NO FAULT/FAULT to turn off circuit CD
A16 Enable NO FAULT/FAULT to turn off circuit CA
SELECT CONTROL
A17 Not assigned
A18 Not assigned
A19 Not assigned
A20 Enable ON LINE/OFF LINE status by means of SCA (pins 11
and 19)
A21 Enable printer in OFF LINE to cause transmission of
XON/XOFF codes
A22 Enable printer in OFF LINE to cause transmission of a 200 msec
BREAK
A23 Enable printer in OFF LINE to turn off circuit CD
A24 Enable printer in OFF LINE to turn off circuit CA
A25 Not assigned
SETTING COMMUNICATIONS AND PRINT PARAMETERS 4–13