Operator`s manual

Figure 4–6: Interface Control Parity
Interface Control
0. Exit
1. Interface Type
2. Interface Straps A
3. Interface Straps B
4. Speed
5. Parity
Parity -
0. Exit
1. Even
2. Odd
3. Space
4. Mark
Parity - Even
Press the number ’0’ to return to normal operation.
To continue modification select (1-8).
Note
The space and mark options are available in 7-bit mode only. In
8-bit mode, these options are not selectable and are not printed.
Figure 4–7: Interface Control Type
Interface Control
0. Exit
1. Interface Type
2. Interface Straps A
3. Interface Straps B
4. Speed
5. Parity
Interface Type
0. Exit
1. Serial
Interface Type - Serial
Press the number ’0’ to return to normal operation.
To continue modification select (1-8).
4–12 SETTING COMMUNICATIONS AND PRINT PARAMETERS