Operator`s manual

Table 1–2 (Cont.): LG31 Printer Specifications
NOTE
The printer’s universal power supply automatically
accepts international voltage and frequency variations.
Input Frequency Range 50 Hz to 60 Hz
Harmonic Distortion 5% maximum allowable
Power Rating
Standby
Printing
50 W
400 W
Shuttle Frequency 20 Hz
Dissipated Power
Standby
Printing
171 BTU/hr
1368 BTU/hr
Radio Frequency Interference Tested/certified to RFI standards FCC 15,
Subpart J, Class A; VDE 0871 Class B
Acoustic Noise LNPA 6.7 bels
LPA 55 dBA
Operating
Altitude 2.4 km (0 to 8,000 ft)
Temperature 10°C to 40°C (50°F to 104°F)
Maximum allowable reduced by factor 1.8°C/1000
m (1°F/1000 ft)
Relative humidity 10% to 90% non-condensing with a maximum wet
bulb temperature of 28°C (82.4°F) a minimum
dew point 2°C (35.6°F)
Non-operating
Altitude 4.9 km (0 to 17,700 ft)
Temperature -40°C to 66°C (-40°F to 150.8°F)
Maximum allowable reduced by factor 1.8°C/1000
m (1°F/1000 ft)
Relative Humidity 5% to 95% non-condensing
Printing
Line Length 33.5 cm (13.2 in)
Lines Per Inch (LPI) Spacing 6, 8, 10
Characters Per Inch (CPI) 5, 10, 12, 13.3, 15, 16.7 (plus horizontal and
vertical expansion of each)
Paper Slew 50.0 cm/sec (20 in/sec)
Line Feed 12.5 msec at 6 lines/inch
Horizontal Tabs 198 positions
Vertical Tabs 66 positions
GENERAL INFORMATION 1–7