Operator`s manual

Conventions

In writing this manual, the following conventions have been adopted for

the mechanical objects listed below

• Control Panel Keys = Capitalized key legend

Example: OFF LINE

• LED Three-Character Display = Bracketed three characters includ-

ing ﬂashing printer mode dots

Example: [.8.8.8]

• Number Designated Keys = Parenthesis enclosed number designa-

tion

Example: (4)

Notes, Cautions, and Warnings

Throughout this manual Notes, Cautions, and Warnings have the follow-

ing meanings:

NOTE: The information is important to the understanding of the

process being described.

CAUTION: The information describes a process that can damage the

equipment or software.

WARNING: The information describes a process that can harm the user.

Assistance

If you have a problem with the LG31 printer, carry out the following

steps:

1. Conﬁrm that the problem can be repeated by recreating the identical

conditions leading up to the problem. A vital step may have been

overlooked which is causing the problem.

2. Identify the problem using the ‘‘Troubleshooting’’ section in Chapter

7 and the list of LED display messages in Appendix A to determine

if the problem can be resolved in-house. If not, the local Digital

Equipment Corporation Customer Service organization should be

contacted.

xiii