Operator`s manual

Table 6–1: Low Paper Printing Procedure
Action Result
When the low paper switch is activated: Displayed alternately between
[LoP]and[OnL].Printer
remains on-line.
NOTE
To DISCONTINUE printing, proceed to step indicated by *.
To CONTINUE printing, carry out the following steps.
Press (0) TEST CLR Displayed alternately between
[LPP]and[OnL].
Lines terminated with <LF> will
continue to move paper normally until
bottom of form is reached and LPP mode
is terminated.
Buffered lines are printed and
data transmission continues
to the end of form. When
paper is replenished, printing
continues on the first form
of the new supply with
correct vertical positioning
maintained.
Lines terminated with <CR> (bold print,
underline) will move paper normally
until bottom of form is reached and LPP
mode is terminated.
Receipt of <FF> terminates LPP mode.
Receipt of <VT>, VPR, forward VPA
(see NOTE 1) or EVFU command moves
paper normally until a command is
received, which would move paper
beyond end of form. The LPP mode
is terminated.
Receipt of subscript or superscript
command (ANSI Emulation) will move
paper normally until bottom of form is
reached and LPP mode is terminated.
PRINTER OPERATION 6–11