Operator`s manual

6.3 Installing/Replacing Ribbon Cartridge
To install the ribbon cartridge, carry out the following steps:
1. Open printer top access door with the cover interlock switch (located
on the top left of the printer).
2. Raise cover interlock switch to its highest position.
3. Clear the [ c o ] (cover open) error indicator, by pressing the text CLR
push button.
NOTE
In replacing the ribbon cartridge (paper thickness remains
unchanged), note the paper gap adjuster setting for use in
step 7.
4. Turn print gap adjuster clockwise to LOAD position for maximum
opening (see Figure 6-4).
Figure 6–4: Ribbon Cartridge Installation, Paper Gap Adjuster Setting
UPPER LEFT
PAPER TRACTOR
PAPER GAP
ADJUSTER
RE_UK00968A_89
PRINTER OPERATION 6–5