Operator`s manual

4.5.7 Buffer Clear
Use the Buffer Clear procedure shown in Table 4-10 to clear the contents
in the printer’s buffer.
Table 4–10: Buffer Clear Procedure
Action Results Display
Press (3) ON
LINE
Printer goes off-line. [ O F L]
Press (9) FCT Printer enters Function mode. [.F n c]
Press (7)
FONT
Printer enters Buffer Clear mode. [ O F L]
At this point, the options are:
(0) TEST CLR Exits from Buffer Clear to off-line. [ O F L]
(7) FONT All information in the printer’s buffer is
cleared.
[CLr]
SETTING COMMUNICATIONS AND PRINT PARAMETERS 4–41