Specifications

F–2 Printer Specifications
Ribbon Specifications
Carbon Black, OCR: LG12R–BC
Fabric: Nylon, 1 inch x 100 yards spool–to–spool;
metal reversing tabs on each end
NOTE: For best print quality, only use ribbons that meet these
specifications. Use of ribbons that do meet Digital specifications
may void your printer warranty.
Paper Specifications
Paper
Type: Edge–perforated, fan–folded, 3 to 16 inches wide
Thickness: Single–part, 15 to 100 pound stock;
Multi–part, 1– to 6–part forms,
carbon and carbonless
Sheet Thickness: 0.025 inches maximum
Drive: Adjustable tractors, 8–pin engagement
Slew Rate: 20 inches–per–second maximum
Labels
On Backing: One–part continuous perforated fan–folded back
form. Labels must be placed at least 1/6 inch from
the fold perforation. Backing adhesive must not be
squeezed out during printing.
Sheet Size: Three to 16 inches wide, including the two standard
perforated tractor feed strips. A maximum sheet size
of 12 inches between top and bottom perforations.
Thickness: Not to exceed 0.025 inch (including backing sheet)