Specifications

6–49
Replacement Procedures and Parts
Item Part
Description Notes
1 101514–025 Screw, Skt Cap, 6x.31 (2) Torque: 8 in–lb
2 102158–005 Washer, Split Lock, #6 (2)
3 131998–001 Shroud, Shuttle
4 140540–001 Cap, Bearing, Right
5 101526–003 Washer, Flat #10 (2)
6 102158–002 Washer, Split Lock #10 (2)
7 101514–017 Screw, Skt Cap, 10x.38 (2) Torque: 10 in–lb
8 101514–057 Screw, Skt Cap, 4x1.00 (2) Torque: 8 in–lb
9 102158–001 Washer, Split Lock #4 (2)
10 133442–001 Block, Dust Barrier, Machined
11 134470–001 Hammerbank Assy
12 131787–001 Foam, Air Seal
13 29–30943–01 Shim, Antirotation (0.010 in.)
29–30944–01 Shim, Antirotation, (0.005 in.)
14 134571–001 Paper Ironer, P9212
15 108297–001 Tape, Hooks, 2.00 W On top of coil leads.
108297–005 Tape, Loops, 2.00 W Attached to base support.
16 101514–054 Screw, Skt Cap, 10x1.375 (2) Torque: 20 in–lb
17 101514–053 Screw, Skt Cap, 4x.31 (2) Torque: 8 in–lb
18 102158–001 Washer, Split Lock #4
19 101526–050 Washer, Flat #4
20 140541–001 Cap, Bearing, Left
21 101514–058 Screw, Skt Cap, 6x1.25 (5) Torque: 15 in–lb
22 101514–028 Screw, Skt Cap, 6x.62 (1) Torque: 15 in–lb
23 131494–001 Block, Antirotation
No. Number