Specifications

1–4
Overview
Controls and Indicators
Electrical Controls and Indicators (Figure 1–1)
Switch or
ON LINE
LCD
LF
Function
Toggles the printer on–line and off–line.
Indicator
Status lamps
FF Advances paper to top of form on next page.
VIEW
Displays configuration menus, submenus, and diagnostic
tests. Locks and unlocks ENTER switch when pressed
simultaneously with  switch.
R/S
ENTER
Displays previous parameter in a configuration or
diagnostic test menu.
Illuminate when printer is on–line. Flash alternately to
indicate fault or warning. Off when printer is off–line.
Advances paper to top of next print line. When pressed
with  switch, micro–steps paper vertically.
Runs and stops configuration and self tests. Runs and
stops hex dump. Resets printer to most recently saved
configuration when pressed simultaneously with CLEAR
switch.
Enters displayed parameter into printer nonvolatile
memory. Must be unlocked before using.
Clears printer after a fault is corrected. Returns printer to
off–line state from within a configuration menu. When
pressed simultaneously with R/S switch, resets printer to
most recently saved configuration.
Displays next parameter in a configuration or diagnostic
test menu.
Advances paper for viewing through cover window, then
returns paper to print position.
CLEAR
SET TOF
Sets location of first line of print on a page.
NOTE: ON LINE is the only switch that operates when the printer is
on–line. All other switches operate only in the off–line state.
Turns printer on and off. Is also a circuit breaker.
Power Switch
Liquid Crystal Display. Shows printer status and error
messages.
 (UP)
 (DOWN)
 (PREV)
 (NEXT)
Displays configuration menus, submenus, and diagnostic
tests. Locks and unlocks ENTER switch when pressed
simultaneously with  switch.