Specifications

5–21
Adjustments
o. Repeat Step 12. to print the comb pattern. If the pattern does not stop
just at the perforation, repeat the steps to increase or decrease the
Paper Out Adjust value as necessary. Otherwise, go to Step 13.
13. Press CLEAR to exit the configuration menus.
14. Press , then press  until the emulation you want to print with is
displayed.
15. Press ENTER to select this emulation. An asterisk (*) appears next to it
on the display.
16. Press  and  at the same time to lock the ENTER switch.
17. Close the printer cover and return the printer to normal operation.