Specifications

5–19

Adjustments

4 in.

Page Perforation

Figure 5–8. Paper Preparation for Paper Out Adjustment Test

NOTE: You will use paper prepared this way a number of times during this

procedure. Cut or tear 8 to 10 pages, every third sheet.

b. Press . the current emulation appears on the LCD.

c. Press  until the display reads “Emulation Self Test.” Press ENTER

to select this “emulation.”

d. Press , then press  repeatedly until the display reads “Self Test

Paperout Adjust.”

This self–test causes the printing of a vertical “comb” pattern at

column 70, each long bar (or comb) separated by 4 dot rows. The

pattern, though much smaller, looks like this:

e. On the page just below the paper channel, cut or tear the paper in the

same manner as in Step 12.a.