User`s manual

4–7Printer Configuration
Changing Printer Emulations
Emulation refers to the ability of the LG06 and LG12 to execute the
commands of a Digital printer, an IBM Proprinter III XL, or an Epson FX
850/1050 series printer.
The Digital emulation is the default mode when the printer power is turned
on, but you can select Proprinter or Epson emulations at any time.
To change printer emulations:
1. If the printer is on–line, press the ON LINE switch to place it in the
off–line state. “Off–line Emulation” appears on the message display.
2. Open the printer cover.
3. Press UP and DOWN simultaneously to unlock the ENTER switch.
“Unlocked” appears briefly on the message display.
4. Press DOWN to enter the emulation menu.
The current emulation displays. (Default is Digital emulation.)
5. Press NEXT (or PREV) until the desired emulation displays.
6. Press ENTER.
The printer sets all configuration values associated with that emulation.
The values are those previously saved when that emulation was
selected. If no values were altered, the factory default values are loaded.
7. Press CLEAR to return to “Off–line Emulation.”
8. Press UP and DOWN simultaneously to lock the ENTER switch.
“Locked” appears briefly on the message display.
9. Close the printer cover.
10. Press the ON LINE switch to place the printer on–line to the host
computer.