User`s manual

3–14 Operating the Printer
Unloading Paper
1. If the printer is on–line, press the ON LINE switch to place it off–line.
Raise the printer cover.
2. Open the printer cabinet front door and tear off the paper near the paper
slot.
3. Fully raise the forms thickness lever. (See Figure 3–5.) When it is
completely opened, you will hear a beep and a fault condition exists.
4. Open both tractor gates and remove the paper from the tractor sprockets.
5. Gently pull the paper up through the paper slot. Be careful not to let
paper perforations or sprocket holes snag on the ribbon mask behind the
shuttle cover.
6. Unload the stacked paper from the cabinet floor.