User`s manual

B–2 Printer Specifications
Cleaning Interval
Clean the printer every 6 months or 1000 hours of operation, whichever
occurs first. Refer to Chapter 6 for cleaning procedures.
NOTE: Using the control panel, you can determine hours of operation from
the printer Statistics menu. (Refer to Chapter 4, Printer
Configuration.)
Ribbon Specifications
NOTE: For best print quality, only use ribbons that meet the specifications
listed below. Use of ribbons that do meet Digital specifications may
void your printer warranty.
LG06: Carbon Black, OCR: LG6XX–BC
Fabric: Nylon, 1 inch x 60 yards spool–to–spool;
metal reversing tabs on each end
LG12: Carbon Black, OCR: LG12R–BC
Fabric: Nylon, 1 inch x 100 yards spool–to–spool;
metal reversing tabs on each end
Paper Specifications
Paper
Type: Edge–perforated, fanfold, 3 to 16 inches wide
Thickness: Single–part – 15 to 100 pound stock; Multi–part –
1– to 6–part forms, carbon and carbonless
Sheet Thickness: 0.025 inches maximum
Drive: Adjustable tractors (LG06: 6–pin engagement;
LG12: 8–pin engagement)
Slew Rate: LG06: 16 inches–per–second maximum
LG12: 20 inches–per–second maximum