User`s manual

Epson FX Emulation9–48
Enable Printing of Hex Codes 00–1F and 80–9F
ASCII Code ESC I n
HEX Code 1B 49 n
Purpose Permits you to print hex codes 00–1F and 80–9F.
where n = 1 allows hex codes 00–1F and 80–9F to be printable and to be
used for user–defined characters.
n = 0 returns hex 00–1F and 80–9F to control codes.
Comment The printable characters that are included in hex codes 00 through1F
and 80 through 9F are usually not printable in the default state on
Epson printers. Sending ESC I 1 enables you to print characters in
this range. Sending ESC I 0 returns the codes to non–printable status.
The printable codes in the Epson character set are shown in
Figure 9–3. The mapping of 00 through 1F and 80 through 9F are the
same in this case. (Figure 9–3 shows the types of characters and their
addresses; it is not a sample of printer output.)
In the IBM character set, the codes are the same as those in Code
Page 437.