User`s manual

Epson FX Emulation9–24
Line Spacing n/216 Inch
ASCII Code ESC 3 n
HEX Code 1B 33 n
Purpose Specifies the line spacing at n/216–inch increments.
where n = 1 to 255
Comment All line feeds following receipt of this code are at n/216 inch line
spacing until a new line spacing is selected or power is reset. Line
spacing set by this control code overrides line spacing setting set at
the control panel.
If the vertical distance to move is other than a multiple of the n/216
inch, the remainder is added to the next paper motion command.
Paper movement occurs in multiples of 3/216 only.
Use caution when combining this control code with other print
attributes such as Elongated (Double High), Superscript, or
Subscript; overlapping lines may occur. Print speed is reduced if
lines overlap.
Example The following example illustrates n/216–inch line spacing.