User`s manual

9–17Epson FX Emulation
Vertical Tab, Execute
ASCII Code VT
HEX Code 0B
Purpose Advances the simulated print head to the next vertical tab position
selected by ESC /.
Comment If no vertical channel was selected, channel 0 is used. If no vertical
tabs were set, the paper advances one line.
The simulated print head moves to left margin. If a tab position is on
the current line, the paper is moved to the next tab position. If there
are no tab positions between the current line and the end of the form,
the paper is moved to the top of the next form. If the printing crosses
the page boundary, the VT command causes the paper to move to the
top of the next form.
This code cancels all one–line–only emphasis and font controls:
double–wide from SO and ESC SO, and unidirectional printing from
ESC <.