User`s manual

Epson FX Emulation9–10
† = Produces non–Epson behavior in the printer.
Character Set Manipulation
Make 80–9F Hex Printable ESC 6 9–46
Make 80–9F Control Codes ESC 7 9–46
Enable Printing of Hex Codes 00–1F and 80–9F ESC I 9–48
Set International Character Set ESC R 9–50
Data Manipulation
Cancel Line CAN 9–51
Delete Character DEL 9–52
Pass Bit 7 from Host ESC # 9–52
Clear Bit 7 of Incoming Data Bytes to 0 ESC = 9–52
Set Bit 7 of Incoming Data Bytes to 1 ESC > 9–53
Graphics
Select Graphics Mode ESC * 9–53
Reassign Graphics Mode ESC ? 9–54
Select 9–Pin Graphics Mode ESC ^ 9–54
Single Density Bit–image Graphics ESC K 9–55
Double Density Bit–image Graphics ESC L 9–56
Double Density with No Adjacent Dots ESC Y 9–57
Quadruple Density Graphics ESC Z 9–58
Miscellaneous Printer Control
Initialize Printer ESC @ 9–59
Printer Select, Remote DC1 9–59
Printer Deselect, Remote DC3 9–59
Unidirectional Print (1 line) ESC < 9–60
Turn Unidirectional Printing On or Off ESC U 9–60
† Turn Half–Speed Mode On or Off ESC s 9–61
Bell (Printer beeps 200 ms) BEL 9–61
† Cut–Sheet/Paper Feed Control ESC EM 9–61