User`s manual

2–10 Installation
LG12 Shipping Restraints
Forms Thickness
Tractor Gates
Lever
Printer Cover
Foam Pad
Foam Blocks
Paper Guide
Figure 2–7. LG12: Removing Tie Wraps, Foam Pad and Blocks
Remove the Tie Wraps, Foam Pad, and Foam Blocks
1. Open the printer’s top cover.
2. Untie the two tie wraps that hold the two foam blocks near the back of
the printer. Remove the foam blocks. Set packing materials to the side.
3. Open the left and right tractor gates. Remove the foam pad and the
envelope (which contains a print sample) from the paper path in front of
the platen. Store the foam pad with the other packing materials.
4. Cut and remove the tie wraps securing the forms thickness lever and the
paper guide.
5. Close the top cover.