User`s manual

8–41IBM Proprinter Emulation
Line Spacing 7/72 Inch (10.3 lpi)
ASCII Code ESC 1
Hex Code 1B 31
Dec Code 27 49
Purpose Specifies the line spacing at 7/72–inch (10.3 lpi) increments.
Discussion When the 7/72–inch line spacing command is received, all lines will be
printed at the 7/72–inch line spacing until a new line spacing is selected
or power is recycled. The line spacing will be set at 10.3 lines per inch.
All control codes that define vertical distance expressed in inches are
stored internally in units of paper drive steps.
A line spacing command can occur at any place in the datastream and is
acted upon immediately.
Example The following example illustrates 7/72–inch line spacing.