User`s manual

8–40 IBM Proprinter Emulation
Line Spacing 1/8 Inch (8 lpi)
ASCII Code ESC 0
Hex Code 1B 30
Dec Code 27 48
Purpose Specifies continuous line spacing at 1/8–inch increments (8 lpi).
Discussion When the 1/8–inch line spacing command is received, all lines will be
printed at 8 lpi until a new line spacing is selected or power is recycled.
All control codes that define vertical distance expressed in inches are
stored internally in units of paper drive steps.
A line spacing command can occur at any place in the datastream and is
acted upon immediately.
Example The following example illustrates 1/8–inch line spacing.