User`s manual

8–9IBM Proprinter Emulation

Table 8–1. Ignored Codes (continued)

ESC 60 – FF ––– 1

Note 1: Can occur at any place in the datastream and is acted upon immediately.

Note 2: If this code is also used in the Serial Interface Protocol (SIP), the SIP

function takes precedence over the control code definition.

Table 8–2 lists control codes not implemented at this time. The codes are

usually followed by large blocks of data. The Proprinter emulation ignores

the control code and any data applicable to that control code.

Table 8–2. Codes Not Implemented

Hex

Code

Symbol

Code

Function

ESC 3D ESC = Download Characters

ESC 50 ESC P Proportional Spacing

ESC 5C ESC \ Print all Characters

ESC 5E ESC ^ Print Next Character