User`s manual

8–8 IBM Proprinter Emulation
Example A sample written in BASIC programming language is provided when it
is possible to illustrate the effect of a control code or if a specific syntax
is required. The programs in this chapter were run on an IBM Personal
Computer using Microsoft GW–BASIC version 3.22.
Ignored Codes
Table 8–1 lists control codes that are ignored by the Proprinter emulation.
Table 8–1. Ignored Codes
Hex Code Symbol Note
00 NUL 1
01 SOH 1
02 STX 1
03 ETX 1, 2
04 EOT 1
05 ENQ 1
06 ACK 1
15 – 17 ––– 1
19 ––– 1
1A ––– 1
1C – 1F ––– 1
21 – 7E ––– See Configuration Structure
Menu, Chapter 4.
7F DEL 1
80 – FF ––– See “Configuration Structure
Menu,” Chapter 4, for command/
character mapping.
ESC 00 – 2C ––– 1
ESC 2E – 2F ––– 1
ESC 38 – 39 ––– 1
ESC 3E – 40 ––– 1
ESC 4A ESC J 1
ESC 4D ESC M 1
ESC 51 ESC Q 1
ESC 56 ESC V 1
ESC 58 ESC X 1
ESC 5D ESC ] 1