User`s manual

7–22 Digital Emulation
Set/Reset Mode
Set (Enable) Reset (Disable)
ASCII Code ESC [ Ps h ESC [ Ps l
Hex Code 1B 5B Ps 68 1B 5B Ps 6C
Dec Code 27 91 Ps 104 27 91 Ps 108
Purpose Turns basic printing features on (set) or off (reset).
Discussion Set/Reset Mode controls certain printer features that have two settings:
on or off. One sequence may be used to turn several features on or off.
Parameter values Ps determine different printer modes.
Parameter values are either ANSI or Digital private. All parameters in a
given sequence must be of the same type. Digital private parameters are
preceded by the question mark character ? (3/15).
On Set/Reset features, default settings go into effect when the printer is
powered–up or a reset (RIS or DECSTR) sequence is sent.
Table 7–4. Set/Reset Mode Parameter Values
Page No.
20
?7
Ps
Printer Mode
11 Position Unit Mode (PUM)
Line feed/New line Mode (LNM)
Autowrap Mode (DECAWM)
ANSI
DEC Private
?29
?40
Pitch Select Mode (DECPSM)
Carriage Return/New Line Mode (DECCRNLM)
(Parameter Values)
7–28
7–23
7–25
7–26
7–24
?70 Force Plot Mode (DECFPM)
7–30