User`s manual

7–17Digital Emulation
If either (A0H) or (FFH) are received after SS2 or SS3, the following occurs:
• The LG06 and LG12 print the error character (a reverse question mark)
and resets the single shift flag when a (94) character resides in the set
being accessed (either G2 or G3).
• If a (96) character resides in the set being accessed (either G2 or G3),
the printer images the corresponding character, (A0H) or (FFH), of that
set, then resets the single shift flag.
How Control Codes Are Described in This Chapter
The rest of this chapter discusses the control codes in detail. Where
applicable, the following information is listed for each control code
sequence:
Name The title or function of the control code. The Digital or ASCII mnemonic
is in parentheses after the name.
ASCII Code The ASCII name for the control code. Escape sequences are in 7–bit
(ASCII) form.
NOTE: In the code descriptions, the ASCII space character (2/0, hex 20,
decimal 32) is represented by SP.
Hex Code The code or escape sequence in hexadecimal numbers.
Dec Code The code or escape sequence in decimal numbers.
Purpose The function(s) of the control code.
Discussion A discussion of the uses of the sequence, and descriptions of any
exceptions or limitations to use.