Specifications

4–6 Adjustment Procedures
Paper Feed Timing Belt Adjustment (Figure 4–3 )
1. Prepare the printer for maintenance (page 4–2).
2. Open the printer cover.
3. Remove the timing belt cover (1) by squeezing the top and bottom to
release the plastic tabs from the slots in the side plate.
4. Loosen the motor mount bolts (2).
5. Using a force gauge, apply 12 pounds of tension to the paper feed drive
motor (3).
6. Reduce tension to 9 pounds and torque the paper feed motor mount bolts
(2) to 18
± 1 inch–pounds.
7. Snap the timing belt cover (1) into the slots in the side plate.
8. Return the printer to normal operation (page 4–22).