Specifications

A–10 Printer Configuration
UU
LG06
PP
NN
Vert. Forms
Horiz Forms Left Mrg n Right Mrg n
D
U
P
N
N
P
U
U
LG06
Horiz. Forms
D
U
N
Vert Forms Bot Mrg n Vert Forms Bot. Frm n Vert Forms Top Mrg n
U
U
U
P
N
P
N
Continued from previous page
U
D
N or P
Autowrap Yes No Autowrap Autowrap
U
*
LG06
U
P
N
D
N or P
CR = CR = CR + LF CR
U
*
LG06
U
P
N
D
N or P
LF = CR + LF = LF LF LF
U
*
LG06
U U
P
N
D
Unsol. Reports?
U
*
LG06
N
P
(1) (1) (1)
(1) n = 0 to 198.0 inch in increments of 1/6 inch. (2) n = 0 to 13.6 inch in increments of 0.1 inch.
(2) (2)
Horiz Forms
CR
No Small Big
(4)
(3) Status reports are only sent when
the RS–232 interface is selected.
(4) Margins will automatically adjust
so that left/right and top/bottom margins cannot cross one another.
(4)
(3)
Unsol. Reports? Unsol. Reports? Unsol. Reports?
P
N
P
N
(4) (5)
(5) Setting the Bot Frm n automatically
sets the top margin to zero and the (Press DOWN to change units: NEXT increases, PREV decreases.)
(Press DOWN to change units: NEXT increases, PREV decreases.)
bottom margin to n. Setting Bot Mrg n does not affect the top margin.