Specifications

A–6 Printer Configuration
Changing Printer Emulations
Emulation refers to the ability of the LG06 to execute the commands of DEC
LG02/LG31/LN01 printers, an IBM Proprinter, or an Epson FX printer. (On
the LG06 printer, the self–test and hex printout modes are also considered
emulations.)
DEC emulation is the default mode, but you can select another emulation at
any time.
To change printer emualtions:
1. Press ON LINE to place the printer in the off–line state.
“Off–Line/Emulation” appears on the message display.
2. Open the printer cover.
3. Press UP and DOWN simultaneously to unlock the ENTER switch.
“Unlocked” appears briefly on the message display.
4. Press DOWN.
The current emulation displays. (“Emulation/LG06” is default.)
5. Press NEXT (or PREV) until the desired emulation displays.
6. Press ENTER.
The printer sets all configuration values associated with that emulation.
The values are those previously saved when that emulation was selected.
If no values were altered, the factory default values are loaded.
7. Press CLEAR to return to “Off–Line/Emulation.”
8. Press UP and DOWN simultaneously to lock the ENTER switch.
“Locked” appears briefly on the message display.
9. Close the printer cover.
10. Press the ON LINE switch to place the printer on–line to the host com-
puter.