Specifications

A–5Printer Configuration
Loading Configuration Values
Configuration values saved using the “Save Config” menu (page A–4)
become the power–up default configuration. The set of factory values
remains permanently stored in printer memory, however.
The “Load Config” menu gives you the choice of loading either the saved or
the factory configuration values.
NOTE: If you have not saved a set of configuration values, this procedure
loads the factory value set.
To load a set of configuration values:
1. Press the ON LINE switch to take the printer off–line.
“Off–Line/Emulation” appears on the message display.
2. Open the printer cover.
3. Press UP and DOWN simultaneously to unlock the ENTER switch.
“Unlocked” appears briefly on the message display.
4. Press NEXT or PREV until “Off–Line/Load” appears on the display.
5. Press DOWN, then press NEXT or PREV to select either “Load/Saved”
or “Load/Factory”.
6. Press ENTER when the desired selection displays.
The printer loads the parameters then displays “Done”.
7. Press CLEAR to return to “Off–Line/Emulation”.
8. Press UP and DOWN simultaneously to lock the ENTER switch.
“Locked” appears briefly on the message display.
9. Close the printer cover.
10. Press the ON LINE switch to place the printer on–line.