Specifications

5–80 Replacement Procedures
Tractor (L/R)
Removal
1. Prepare the printer for maintenance (page 5–3).
2. Remove the splined shaft (page 5–62).
3. Remove the support shaft (page 5–64).
4. Remove the tractors from the support shaft.
Installation
1. Using the replacement tractors, install the support shaft (page 5–64).
2. Install the splined shaft (page 5–62).
3. Return the printer to normal operation (see below).
Returning the Printer to Normal Operation
1. Load paper.
2. Install the ribbon.
3. Close floor cabinet doors and the printer cover.
4. Connect the ac power cord to the power source and the printer.
5. Set the power switch to 1 (on).
6. Test printer operation by selecting and running one of the diagnostic
self–tests (page 3–26).