Specifications

5–42 Replacement Procedures
Paper Guide Assembly (Figure 5–18 )
Removal
1. Prepare the printer for maintenance (page 5–3).
2. Open the printer cover.
3. Loosen—do not remove—the hold–down screw (1).
4. Slide the paper guide assembly (2) to the left and lift it off the card cage
(3).
Installation
1. Position the paper guide assembly (2) offset slightly to the left on the
card cage (3).
2. Slide the paper guide assembly (2) to the right and engage the tabs on
the underside of the paper guide assembly with the left edge of the card
cage.
3. Slide the paper guide assembly (2) to the right as far as it will go.
4. Tighten the hold–down screw (1).
5. Return the printer to normal operation (page 5–80).