Specifications

5–24 Replacement Procedures
Cover Assembly, Shuttle (Figure 5–9 )
Removal
1. Prepare the printer for maintenance (page 5–3).
2. Open the printer cover.
3. Loosen the shuttle cover screws (1).
4. Grasping the edges of the shuttle cover assembly (2), tilt up the rear
edge and lift the shuttle cover assembly out of the printer.
Installation
1. Place the shuttle cover assembly (2) in the printer. Tilt the forward edge
of the cover down slightly and work the cover into position.
2. Tighten the shuttle cover screws (1).
3. Return the printer to normal operation (page 5–80).