Installation guide

must direct the output to a printer special file as shown in the following
example:
# /usr/sbin/uerf > /dev/lp
You can use some options together. For example, the following command
produces a report from the /var/admin/logs.old file for the system
guitar:
# /usr/sbin/uerf −f /var/admin/logs.old −H guitar
The following example uses the −t and the −o options to display messages
for the current day in terse format:
# /usr/sbin/uerf -t s:00 -o terse
The following example shows the default output of the uerf command:
# /usr/sbin/uerf
uerf version 4.2-011 (118)
************************* ENTRY 1. **************************
----- EVENT INFORMATION -----
EVENT CLASS OPERATIONAL EVENT
OS EVENT TYPE 300. SYSTEM STARTUP
SEQUENCE NUMBER 0.
OPERATING SYSTEM DEC OSF/1
OCCURRED/LOGGED ON Tue Jan 11 17:16:18 1994
OCCURRED ON SYSTEM pearl
SYSTEM ID x0004000F CPU TYPE: DEC
CPU SUBTYPE: KN15AA
MESSAGE Alpha boot: available memory from
_0x646000 to 0x6000000
DEC OSF/1 X1.2-11 (Rev. 4); Tue Jan
_11 17:13:53 EST 1994
physical memory = 94.00 megabytes.
available memory = 85.48 megabytes.
using 360 buffers containing 2.81
_megabytes of memory
tc0 at nexus
scc0 at tc0 slot 7
asc0 at tc0 slot 6
rz1 at asc0 bus 0 target 1 lun 0 (DEC
_ RZ25 (C) DEC 0700)
rz2 at asc0 bus 0 target 2 lun 0 (DEC
_ RZ25 (C) DEC 0700)
tz5 at asc0 bus 0 target 5 lun 0 (DEC
_ TLZ06 (C)DEC 0374)
asc1 at tc0 slot 6
fb0 at tc0 slot 8
1280X1024
ln0: DEC LANCE Module Name: PMAD-BA
ln0 at tc0 slot 7
ln0: DEC LANCE Ethernet Interface,
_hardware address: 08:00:2b:2c:f6:9f
DEC3000 - M500 system
Firmware revision: 2.0
PALcode: OSF version 1.28
lvm0: configured.
Using the uerf Event Logger D–3