Installation guide

:fs#03:\
:if=/usr/lbin/ln03rof:\
:lf=/usr/adm/lperr:\
:lp=/dev/tty01:\
:mc#20:\
:mx#0:\
:of=/usr/lbin/ln03rof:\
:pl#66:\
:pw#80:\
:rw:\
:sd=/usr/spool/lpd:\
:xc#0177777:\
:xf=/usr/lbin/xf:\
:xs#044000:
Command < add modify delete exit view quit help >: exit
Refer to the lprsetup(8) reference page for more information on using the
program.
10.5.2.1 Print Symbols for Advanced Printing Software
When setting up Advanced Printing Software, you should set the following
print symbols:
• rm – Specify @dpa to create a gateway
• rp – Specify the name of an Advanced Printing queue
Refer to the Advanced Printing administration documentation for more
information.
10.5.3 Setting Up Remote Printers
You can use the lprsetup script to set up remote printers that are
accessible from a Local Area Transport (LAT) or from a remote machine.
_______________________ Note _______________________
If a printer is connected to multiple queues through a LAT or a
local tty port and different jobs are submitted to different queues
within a short period, some of the jobs may be lost. If this
happens, resubmit the print request.
If you are setting up a remote printer from a remote machine, the local
machine (the client) must be listed in the .rhosts file of the remote
machine (the host).
Administering the Print Services 10–13