Installation guide

xs fo ic nc ps Da Dl It Lf Lu Ml Nu Or Ot Ps Sd
Si Ss Ul Xf
Enter symbol name: q
Printer #0
----------
Symbol type value
------ ---- -----
af STR /usr/adm/lpacct
br INT 9600
ct STR dev
fc INT 0177777
fs INT 03
if STR /usr/lbin/ln03rof
lf STR /usr/adm/lperr
lp STR /dev/tty01
mc INT 20
mx INT 0
of STR /usr/lbin/ln03rof
pl INT 66
pw INT 80
rw BOOL on
sd STR /usr/spool/lpd
xc INT 0177777
xf STR /usr/lbin/xf
xs INT 044000
Are these the final values for printer 0 ? [y] y
Next, the lprsetup script prompts you to add comments to the
/etc/printcap file. Enter n at the prompt if you do not want to add
comments. Enter y at the prompt if you want to add comments. At the
pound sign (#) prompt, enter your comment. Press Return at the pound
sign (#) prompt to exit. The comments will be insert directly above the
printcap entry in the /etc/printcap file.
Adding comments to printcap file for new printer, type ’?’ for help.
Do you want to add comments to the printcap file [n] ? : y
# Use this printer for draft-only
#
Return
Set up activity is complete for this printer.
Verify that the printer works properly by using
the lpr(1) command to send files to the printer.
Command < add modify delete exit view quit help >: view
# Use this printer for draft-only
pearly|lp0|3X27|tomw:\
:af=/usr/adm/lpacct:\
:br#9600:\
:ct=dev:\
:fc#0177777:\
10–12 Administering the Print Services