User guide

3.2.1.1 Viewing the Last Printed Line This section and Section 3.2.1.2
describe two LA75 Plus features that are available using the Rear Loading
method.
There are three methods to advance the paper to see the last printed line.
(This procedure applies only to pinfeed paper.) To ease readability, the paper
support should be in the raised position.
A When printing has ended and the printer is in the Ready state:
1 Press the Ready switch.
The paper advances so that the last printed line can be seen above the
tear-off line.
2 Press the Ready switch again.
The paper returns to the previous printing position.
B When the printer is printing:
1 Press the Ready switch.
The printing stops, and the paper advances so that the last printed line
can be seen above the tear-off line.
2 Press the Ready switch again.
The printer moves back, and printing continues from the next line
C If you select Automatic Advance, the paper will advance for viewing if no
data is received for two seconds. The paper will move back as soon as the
next data is received.
Note: You cannot view the last printed line if the end of the paper has been
detected.
3–12 Loading the Paper