User guide

Activating the Automatic Paper Feed
You can now advance the paper to the print position by activating the
automatic paper feed as follows.
Turn the power switch to 1 (on).
All the indicators light up on the Control Panel. The printhead moves to
the center, to the print position, and the paper automatically moves under
the platen, also to the print position.
If the power was already on, press FF to load the paper.
Quiet/
Quality
LQ
Protocol LFDEC
Draft
QuietFault
RDY
Serial Port
Set-up
Ready
FF
You are now ready to print.
Loading the Paper 3–11