User guide

Parking Lever
The parking lever (7) controls the autopark function. This function is used to
move pinfeed paper into the park position before single-sheet loading.
Bail Bar
The bail bar (5) holds the paper against the platen (9). The red marks (6) on
the bail bar indicate the print area for a standard sheet of paper. Use these
marks to position the paper corrrectly.
Platen Knob
The platen knob (4) is only used to clear paper jams. Do not use it in any
other circumstances.
Paper Release Lever
The paper release lever (3) controls the paper drive system. Pull the lever
towards the front of the printer for tractor feed. Push the lever towards the
back of the printer for friction feed.
Tractor Release Levers
The tractor release levers (2) are used to position the entire tractor unit for a
paper-feed operation.
Tractor Clamps
The tractor clamps (1) allow you to adjust the position or location of the
tractors for different paper sizes. Pull the clamp towards the front of the
printer to move the tractor to the left or right. Push the clamp towards the
back of the printer to lock the tractor in place.
Tractor Stop
The tractor stop (8) prevents the left tractor from being moved too far to the
right.
Loading the Paper 3–3